Tripp Lite WWSS1332W WorkWise Wall-Mounted Workstation, Single Display

DMCS1732S

LAPTOP-SIT-STAND

Roll This All-in-One Adjustable-Height Workstation Wherever You Need to Go
This workstation with monitor mount has four swivel casters, so you can roll it wherever your work takes you. The placement of the monitor and keyboard tray are adjustable, so you can use the DMCS1732S as a standing desk or a sitting workspace at home, school or the office. Because of its small footprint, the workstation fits in spaces too small for a traditional desk. When not in use, the workstation can be rolled into a secure area for storage. Two of the casters lock to prevent unwanted movement.

Easily Mount a 17" to 32" Display and Adjust the Viewing Angle
For hassle-free display compatibility, this rolling cart supports 75 x 75, 75 x 100, 100 x 75 and 100 x 100 VESA mounting hole patterns for flat-panel displays from 17 to 32 inches. Maximum supported weight is 17.6 lbs (7.9 kgs) Depending on where it is secured to the steel support pole, the monitor mount can provide a viewing height anywhere from 37 to 68.9 inches above the floor. The mount offers -15° to +15° tilt adjustment to improve the viewing angle. It also has ±180° rotation.

Move the Keyboard Tray to a Comfortable Height
The keyboard tray adjusts from 34.8 to 66.7 inches above the floor. To raise or lower the tray, simply loosen the adjustment knobs, move the tray to the desired height and tighten the knobs. The keyboard tray has a wrist rest and plenty of room for the included mouse pad. It supports up to 4.4 lbs (1.9 kgs). A cable manager keeps keyboard and mouse cables separated and untangled. The support pole has two guides for neatly routing all cables toward the bottom of the workstation.

Adjust the CPU Holder to Accommodate Different Form Factors
To accommodate a variety of form factors, the CPU holder's width adjusts from 4.8 to 8.3 inches. You can also adjust the height of the holder from 4.4 to 28.8 inches above the floor. The holder supports up to 22 lbs (9.9 kgs) and includes straps to secure a CPU or other component.

Sit to Stand Desk | Six Height Options | Pre-assembled

This standing desk converter for laptops is an easy-to-use solution that improves the ergonomics of your workstation. The adjustment lever is readily accessible, permitting quick adjustments from sitting to standing positions. Adjusting the height of the platform can increase comfort, decrease fatigue, and improve your posture. The footprint of the sit-to-stand platform is small, allowing you to preserve the functionality of your desk.

The platform measures 26.4 x 18.5 in (67 x 47 cm) providing a sufficient workspace and weight capacity (Up to 17.6 lb / 8 kg) for a laptop, keyboard, and mouse.

Height Adjustment

Six height options ranging from 1.8 - 15.9 in (4.5 - 40.5 cm) enable a wide range of configurations to satisfy your ergonomic needs. The spring-assisted platform automatically locks at the next available height setting when adjusting the platform up or down. This provides an added level of safety when modifying the height settings. A finger guard complements the built-in safety features and ensures easy operation.

Rapid Deployment

The sit-stand desk converter ships fully pre-assembled and it can be deployed out of the box. The configurable design allows you to position the height adjustment button on either side of the platform. EVA foam pads protect the mounting surface from scuffs and scratches. The lightweight design allows for easy adjustments and transportation.

This product is backed for 2-years, including free lifetime 24/5 multi-lingual technical assistance.

The StarTech.com Advantage

Mobile Workstation with Monitor Mount - For 17" to 32" Displays, Height Adjustable

StarTech.com Standing Desk Converter for Laptop - Up to 8kg/17.6lb - Height Adjustable Laptop Riser - Table-Top Stand-Up Desk Converter for Home Office - Sit-Stand Desk Platform (LAPTOP-SIT-STAND)

Tripp Lite

StarTech.com