ATGBICS 160-9460-005 Ciena Compatible Active Optical Cable 100GBase QSFP28 (850nm MMF 5m)

SFP-10G-AOC2M=

SFP-10G-AOC5M=

SFP-10G-AOC3M=

CAB-SPWR-150CM=

DEM-CB300S

No

No

Crossover and straight-through cables are used in order to connect switch ports or interfaces to network devices. Consult this table in order to see when to use each of these cable types. Find the device in the left-hand column and match it up with another device in the top row. The intersection of these two devices gives you the cable type used to connect them together.

The Cisco StackPower cables are thick but flexible, and they carry power as well as a data signal to provide a communications channel among the switches in the power stack.

StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS.

A StackPower cable has colors bands on the cable ends, green on one end and yellow on the other end. This cable can be used between Catalyst 3750-X switches and an XPS. Note that the connector with the blue band can only connect into a Catalyst 3750-X switch while the connector with the yellow band can connect to a Catalyst 3750-X or an XPS.

An XPS cable has a color band on the cable ends as well, red on one end and yellow on the other end. This cable can only be used to connect Catalyst 3750-X or 3560-X switch to an XPS. Note that the connector with the red band can only connect to an XPS while the connector with the green and blue band can connect to Catalyst 3750-X or 3560-X switch.

The Cisco Catalyst 3750-X Series Switches come with four power supply options and any of them can be used on any switch in a stack and in any combination.

No

SFP+ Cable 2 Meter

SFP+ Cable 5 Meter

10GBASE-AOC SFP+ Cable 3 Meter

150cm StackPower cable, Spare

300 cm, 10GbE Direct Attach SFP+ Cable

Cisco

Cisco

Cisco

Cisco

D-LINK